050624-2 Direct Drive Water Jet Pump Parts Major Repair Kit

050624-2 Waterjet Cutting Direct Drive Pump Part Major Maintenance Kit water jet cutter parts

050624-2 Waterjet Cutting Direct Drive Pump Part Major Maintenance Kit water jet cutter parts description:

050624-2:

The development of our company's waterjet:

While absorbing the advanced experience of the world’s peers, we are adhering to the concept of continuous innovation. In recent years, through the joint efforts of the "Chinese Waterjet" peers, we have continuously expanded the application fields of waterjets and focused on the research and development of new technologies and auxiliary equipment. At present, we have The high-tech products are as follows:

1. The working pressure of the high-power system with parallel turbochargers can reach 400 M P a, and the power output is 100HP~200HP.

Large-scale high-precision CNC water cutting machine tool

2. Large working platform for metal cutting; X-direction size can reach 5000mm, Y-direction size can reach 8-50m and above; Control precision: ±0.02mm/m; Cutting precision: ±0.1mm; X, Y-direction movement speed: 0～40m/min; number of cutting heads: 2～

4.

3. In order to greatly improve the cutting effect of "waterjet", the continuously improved NEWCAM software for water cutting, the CAD module has modular programming, automatic typesetting and nesting, and the CAM module has the characteristics of automatic deceleration at corners and automatic deceleration when cutting. By reducing the program speed at the corner and the cutting point, the corner over-cutting phenomenon caused by the hysteresis effect of the water jet and the situation that the program end point cannot be cut off by the water jet can be solved, and the quality and efficiency of the auxiliary design and the cutting effect can be effectively improved.

4. Five-axis water jet:

To achieve high-precision non-bevel cutting and cutting of conical surfaces, arc surfaces, rotating surfaces, bevels, bevels, etc., a five-axis linkage water cutting machine must be used.

5. Double-head/multi-head water cutting machine:

It is matched with the high-power pressure generating system and adopts the simultaneous cutting method of multiple cutter heads, and the cutting efficiency can be increased several times with little increase in cost.

Other auxiliary equipment:

In order to improve processing efficiency, we have also developed the following auxiliary equipment:

1. Ultra-high pressure water switch: Ultra-high pressure water switch: DWCH; working pressure: 400Mpa; working mode: normally closed, pneumatic opening; working performance: open or close within 10ms.

2. High-efficiency sand cutting head: The water nozzle and the sand pipe have the closest distance, so that the water jet energy can be used to the maximum and the best cutting efficiency can be obtained.

3. Automatic sand supply system-continuously convey the cutting abrasive to the cutting machine without any manual intervention, and automatically detect the amount of sand and send out an alarm signal to achieve the purpose of long-term use of sanding once.

4. Automatic sand discharge system — During the cutting process, the generated mud is automatically pumped out, the sand and water are separated after filtration, and the water is poured back into the water tank to ensure the water level of the water tank and avoid long-term accumulation of sand in the water tank. Eliminate manual cleaning.

5. Automatic height adjustment system-in the cutting process, actively follow the undulation of the workpiece and automatically adjust the height of the cutting head to adapt to the best cutting.

Our Service:

Waterjet cutter spare parts retail and wholesale

Provide waterjet cutting processing services for parts suppliers and distributors, and sign confidentiality agreements

Provide accessories for waterjet machine manufacturer

Waterjet Cutting Machine

Provide customized machine for your drawing